Sierra

Radio

PayPal: View Cart

This stacking backpack board has 2 high current SPDT relays, screw terminal blocks, LED indicators, buffer chip, resistors, and stacking connectors.  The board can handle a maximum of 8 amps.  Due to the height of the relays, this board would normally be the top board in a stack.  Four mounting holes are provided for mounting in a chassis box.

#408

$29.95

Includes PCB, 18F4620 CPU chip and all components.  10 or 40 Mhz operation and 30 IO pins including digital IO, 6 A/D, 1 UART w/RS232, 1 I2C, 1 SPI, 4 PWMs.  We recommend this kit for typical projects and when using the either the Swordfish Basic compiler or the Microchip C18 C compiler.

#401

Basic

C18

$39.95

Includes the PCB, 7 stacking connectors, 4 1x6 SIP jumper sockets, 2 push buttons, 3 LEDs, 1 270 Ohm resistor pack.  Ideal for building your own project by adding components in addition to the CPU board.

#403

$19.95

Includes the PCB, 7 stacking connectors, 4 1x6 SIP jumper sockets, 2 push buttons, 3 LEDs, 1 270 Ohm resistor pack.  Ideal for building your own project by adding components in addition to the CPU board.  This is the same as the Prototype Backpack Kit but also includes a solderless breadboard block.

#404


$24.95

CPU kit with 18F46K22 CPU chip

Includes PCB, 18F46K22 CPU chip and all components.  16 or 64 Mhz operation with 30 IO pins including digital IO, 6 A/D, 2 UARTs with 1 RS232 interface, 2 I2C, 2 SPI, 4 PWMs.  We recommend this kit for high performance applications using the Swordfish Basic compiler or the Microchip C18 C compiler.

#402

$39.95

C18

Basic

This is the full commercial version of the Swordfish Basic compiler.  All the same features as the free Special Edition version with the RAM limit of 256 bytes removed.

#405


$150.00

Includes 2 row x 16 character backlit LCD panel, 4 bit parallel interface board and cable.  Requires 6 control signals (D4, D5, D6, D7, RS, E) plus power and ground (+5v).  Uses the industry standard Hitachi LCD controller chip (built-in).  Plugs directly into many HamStack backpack and project boards including #410, #415, #423.  Supported by Swordfish Basic and Microchip C18 C compiler.  Partly assembled.

#406

$29.95

Welcome to the Sierra Radio / HamStack store.  You can select the items to add to your shopping cart. When you are done, you will be taken to the PayPal payment processing page.  You can select to pay with Visa, MasterCard, Discover, American Express or PayPal.  You do not need a paypal account to pay on line.

HamStack Microcontroller Products - Starter and Project Packs

PayPal: View Cart

Includes everything you need to start working on your next project.

CPU kit (#401), Prototype backpack kit with solder-less breadboard (#404), USB in-circuit programmer, Getting Started Guide book, software CD with the Swordfish compiler and other utilities, jumper wires, AC power adapter.

#400

$119.95

Basic

C18

$119.95

This kit contains the Project Board PCB that includes a 5v, 3.3v and 2.5v bias power supply, several connectors, DTMF decoder chip, sine wave tone generator, 3 SPST reed relays, optoisolated output, 4 analog inputs with voltage dividers to measure up to 22 v DC.  Sample projects include a CW keyer, CW beacon controller, tone generator, DTMF to serial decoder, remote device controller, etc.  Includes PCB, parts and plastic chassis box.

#410

The HamStack temperature probe uses the Dallas Semiconductor (Maxim) DS18B20 digital thermometer chip.  The DS18B20 is encased in a metal housing with a 2’ cord terminating in a 3 pin connector that will directly plug into the HamStack Project Board.

#411

$12.95

Special Order

Use this item when placing a special order.  


#499

$1.00

This interface board will convert a USB connection on your PC to an Xbee radio module or TTL level serial interface on the HamStack.  This board can be mounted in a small box or left free-standing.  

#442

$19.95

This handy set of 10 jumper wires have male pins on both ends.  They plug directly into the HamStack stacking connectors or solderless bread board connections points.

#413

$4.95

The PC to RS-485 interface converts RS-232 signals from a PC or USB dongle to the differential signaling voltages used in RS-485 serial networks.  This interface includes the converter (pictured), DB-9 connector and cable mounted RJ-45 connector used in HamStack networked devices.

#414

$12.95

$119.96

The GPIO board includes 8 DPST relays rated for 8 amps, a switching power supply that accepts 8-14 VDC input, dual RS-485 serial multi-drop network connections, 4 digital inputs with 10k pull up resistors, and 4 analog inputs with jumper selectable range (0-5 VDC or 0-22 VDC).  The standard HamStack CPU board plugs on top of the GPIO board to add smarts.

#415

The rotary encoder kit includes a mechanical quadrature encoder with pushbutton closure, knob, pullup resistors, header connector and PCB.

#431

$22.95

FULLY ASSEMBLED CPU Board with 18F46K22 CPU chip

This is the same as #402 but it is fully assembled and ready to use.  Includes top and bottom board interconnect sockets.  The board features the 18F46K22 CPU chip, 64 Mhz operation with 30 IO pins including digital IO, 6 A/D, 2 UARTs with 1 RS232 interface, 2 I2C, 2 SPI, 4 PWMs.  

#451

$49.95

C18

Basic

HamStack CPU Boards

HamStack Backpack Boards - Mount on top of a HamStack CPU board

HamStack Language Compilers

This kit includes the PCB, components and chassis box.  Use this kit to connect your PC USB port to the xBee RF data network.  

XBee data radio transceiver sold separately.

#417

$39.95

Includes the PCB, 7 stacking connectors, 4 1x6 SIP jumper sockets, 2 push buttons, 3 LEDs, 1 270 Ohm resistor pack.  Ideal for building your own project by adding components in addition to the CPU board.

#423

$23.95

Includes the PCB and all components except the radio transciever.This backpack board supports any of the Digi-International xBee RF data modules.  Use these boards to serial data communications between HamStack boards or computers.

XBee data radio transceiver sold separately.

#416


$19.95

This kit includes the PCB and components to connect your HamStack project to the internet through this ethernet connection.  The board uses the Lantronix Xport and Xport PRO ethernet to serial modules.  

Lantronix module sold separately.

#419

$19.95

Includes 4 row x 20 character backlit LCD panel, 4 bit parallel interface board and cable.  Requires 6 control signals (D4, D5, D6, D7, RS, E) plus power and ground (+5v).  Uses the industry standard Hitachi LCD controller chip (built-in).  Plugs directly into many HamStack backpack and project boards including #410, #415, #423.  Supported by Swordfish Basic and Microchip C18 C compiler.  Partly assembled.

#409

$39.95

HamStack Accessories

Lantronix Xport PRO Ethernet to Serial Module - Evolution OS

$99.95

We provide this component as a convenience to our customers.  You can also purchases this module at a lower cost directly from the distributor, Mouser Electronics.

(Mouser part number 515-XPP1002000-01R)

#420

XBee Pro 2.4 Ghz Digi-Mesh Data Radio Module - 1mw w/patch antenna

$29.95

We provide this component as a convenience to our customers.  You can also purchases this module at a lower cost directly from the distributor, Mouser Electronics. or Digikey

#425

XBee Pro 2.4 Ghz Digi-Mesh Data Radio Module - 50mw w/RP-SMA Ant.

$49.95

We provide this component as a convenience to our customers.  You can also purchases this module at a lower cost directly from the distributor, Mouser Electronics or Digikey.

#426

XBee Pro 900 MHz Digi-Mesh Data Radio Module - 50mw w/RP-SMA Ant.

$49.95

We provide this component as a convenience to our customers.  You can also purchases this module at a lower cost directly from the distributor, Mouser Electronics or Digikey.

#427

This kit includes the PCB and components to build a digital compass using a Honeywell 2-axis magnetometer.  The compass module connects to the HamStack CPU using the I2C serial interface.  Unlike some cheaper units, this device outputs the actual compass heading in 1/10th of a degree.  The compass is accurate to within 2 degrees.  

#421

$89.95

WiFi Radio Module with SMA Antenna connector

$49.95

This WiFi radio provides network connectivity for your project.

#435

2.4 Ghz 5 dbi antenna for WiFi RF module (SMA connector)

$9.95

This antenna uses a standard SMA connector.

#436

This is the same PCB as the #421 but without the magnetometer module or other ICs.  This is a general purpose backpack board that can host a DS1307 real time clock chip, or a DS18B20 digital thermometer chip or a DB9 for RS232 serial communications.

The kit includes the PCB and basic connectors.  Does not include the magnetometer, or DS1307 or DS18B20 chips.

#432

$19.95

PowerSwitch

This remotely controlled AC power relay can switch up to 15A at 120 VAC.  Control interface is a two wire, low voltage, low current logic control line.  Opto-isolated interface.

#446

$29.95

USB In-Circuit Programmer

This in-circuit programmer is used to transfer your compiled program code into the HamStack CPU board.  It is compatible with the Microchip PicKit2 programmer and uses the Microchip software and component libraries.  Includes male-to-male header connector to plug directly into HamStack boards.

#433

$29.95

This battery charger takes 5v DC input or solar panel input to charge a Lithium Polymer battery.  The 3.7v battery voltage is boost regulated to 5v DC to operate HamStack boards.

(#492)

$19.95

This battery charger takes 5v DC input or solar panel input to charge a Lithium Polymer battery.  The 3.7v battery voltage is boost regulated to 5v DC to operate HamStack boards.

This board uses the HamStack / Arduino pin configuration and can be stacked.

(#493)


$19.95

1 Watt solar panel with 2mm JST connector to match the two chargers above.

#494

$9.95

This high capacity Lithium Polymer battery works great with either charger and solar panel.  The battery comes with a 2mm JST connector.

#495

$19.95

$22.95

Cost Effective 915 MHz data radio module.  9600 baud UART and Xbee pin compatible.

#441

3 Watt solar panel with 2mm JST connector to match the two chargers above.

#496

$19.95

This handy little interface board will convert a USB connection on your PC to a TTL level serial interface on the HamStack.  This board mounts directly on top of the HamStack Project Board in place of the DB9 RS-232 connector.  The board can also be used to adapt the TTL signals from the HamStack CPU board to a USB connection.  This requires some custom wiring.

#412

$15.95

This compact GPS receiver plugs into any Xbee compatible interface.  

May we suggest #

#443

$49.95

This board provides 4 SPDT relay controlled by CPU pins RD2, … RD5.


#444

$24.95

This mini-module provides a DB9 RS232 connection through a level shifter to 5v logic level signals on the header connectors on the bottom of the board.

#473

$12.95

HamStack Mini-Modules

This mini-module provides a RS485 to 5v logic interface including automatic TR switching.

#474

$16.95

This mini-module provides an Xbee module socket interface to 5v logic.  The interface includes a 3.3v power regulator and 3v to 5v logic level shifting.

#475

$12.95

This mini-module takes audio input, decodes DTMF tones and sends decoded digits out the 5v logic serial port as an ASCII character 0 1 2 3 4 5 6 7 8 9 * # A B C D.

#476

$24.95

This development board is the is ideal for prototyping your next project or learning to design and program with the HamStack platform.  This bundle includes #430 Development Board Kit and #433 in-circuit programmer.


#460  (Includes #430 + #433)


$139.95

DEV-1 Development Board

Basic

C18

$10 Off !

This development board is the is ideal for prototyping your next project or learning to design and program with the HamStack platform.  The board includes a 2x16 backlit LCD display, 4 buttons, 4 LEDs, potentiometer, rotary encoder, audio amplifier for tone generation, RS232 port, one relay and the socket for a HamStack CPU board module.

The manual includes step-by-step programming instructions and examples.  
Includes an 18F4620 CPU chip mounted to the PCB.

#430

$119.95

DEV-1 Development Board

Basic

C18